Pop Flex
updates | September 09, 2026

How do you hang curtains with drapery hooks?

Insert the pointed, straight portion of a drapery or curtain hook at the base of the seam, into the fabric, so that it slides into the hemmed portion. It should not poke out through the front or top of the panel. Space the hooks eight to nine inches apart, and place one on each end.

What curtains to use with clips?

The best curtain ring clips work with flat panels, but they also work with rod pocket curtains. Attach the clips to the top edge of the panel by flattening the pocket.

What is rod pocket curtain?

Rod pocket means that the rod will go through the pocket on the back of the curtain and back tab means that there are also tabs in the back of the curtain if you wish to hang it like that. If you hang through the rod pocket, it may not be as easy to move the curtain as it would be if you hung through the back tabs.

Can you use curtain hooks on rod pocket curtains?

Pinhooks can give you the custom-pleated look you want without the wear and tear on your wallet that nobody wants. The best news is that with a little ingenuity, pinhooks can be used with rod pocket curtains and a curtain rod, sparing you the expense of the more traditionally-used traverse rod.

What does the curtain match the drapes mean?

Phrase. the carpet matches the drapes. (colloquial, vulgar, humorous) A person’s pubic hair is of the same colour as the hair on their head, i.e. their hair is not dyed.

What’s the difference between a curtain and a drape?

A big distinction is that drapes are typically made from heavier materials such as damask, silk or velvet. Although, they can be made from other fabrics. Drape length is on the longer side and headers are just as varied as curtains. Drapes often have lining, while curtains are unlined.

Can you hang back tab curtains with hooks?

Many drapes come with back tabs where you can clip the rings, or you can pinch the fabric to create pleats. When using drapery hooks, you have to make sure the hook does not go through to the front of the drape. You only want it to grab the back tab or lining. Thread the hole in the ring through the hook to attach.

What type of curtain hooks do I Need?

Pin-On Hooks. Also known as drapery pins,these hooks have a sharp pin that points up vertically toward the top of the hook.

  • Pleater Hooks. Also known as slip-on hooks or prong hooks,these devices work with pleater tape sewn into the heading of the panel.
  • Other Hook Types.
  • Curtains Without Hooks.
  • How to put up curtains with command hooks?

    Purchase 2-3 jumbo command hooks per window.

  • Clean wall surface where you will be applying hooks with rubbing alcohol and clean cloth or paper towel.
  • Mark the placement of the hooks.
  • Separate the strips of adhesive and remove the red liners.
  • Slide the hook up and off the adhesive base and press the base an additional 30 seconds.
  • How high to hang curtain hooks?

    Measure 1/2 inch down from the top of the curtain. Your curtains should be level with the curtain rod, so you shouldn’t insert the hooks at the very top. Instead, measure about 1/2 inch down and make a mark there. That’s where the top of your hook should rest when it’s inserted.

    Where should curtain holdbacks be positioned?

    Curtain holdbacks are attached to the wall a bit more than halfway down from the top of the window. These provide a permanent and easily-accessed method of keeping curtains open and letting light into the room.